Building Supplies

An expanded metal mesh available in various widths, stainless or galvanized steel.

Designed to be incorporated into masonry for crack control

Mesh hole size 20mm x 10mm 

Sold Each

Multi-pupose angle bracket 

Manufactured from 2.5mm thick galvanised steel

Manufactured from 0.9mm thick galvanised steel as standard

Sold in Boxes of 100, 200 & 250 units. Please check our size chart in the product description section

Box of 10

Various sizes available

Attaches and supports roof truss from girder truss

Box of 50

Various sizes available

For swift use in light-duty applications

Provides support for short-span joists, trap hatches and in-fill timbers within the roof space

Sold Each 

Various sizes available 

For medium and light applications

Suitable for joist depth up to 175mm

Sold Each

Various sizes available

Attach trussues and rafters to wall plates

Provides restraint against the wind

Fully certified crack-stiching kit. Heli Bar 6mm x 1 metre. 

Perfect for horizontal restraint applications such as tying timber roofs and floors into masonry walls. These straps are galvanized and edge-coated for maximum durability and longevity.

Light-duty restraint straps are designed for vertical restraint applications, such as holding down wall plates to masonry.

Galvanised Steel

Other sizes/alterations are available on request

The sizes below are overall length (girth) with bend at 100mm

Heavy Duty Restraint Straps for horizontal applications. Securely tie timber roofs and floors to masonry walls. Multi-holed design with 6mm holes, 25mm offset.

Available with a 4-5 day lead time 

Galvanised steel

Sold each

Sold Each

Various sizes available

For light, medium and heavy applications

Sold Each

Various sizes available 

Designed for general fixings of timber components

Maximum drop of 75mm 

Used for repairing damaged slates

Available in packs of 10 or 100

Material: Copper

Size: 150mm

Used for repairing damaged slates

Available in packs of 10 or 100

Material: Aluminium

Size: 150mm

Sold in boxes of 10

Used to connect new masonry to an existing structure

Contains drip to prevent moisture from crossing the cavity

Available in galvanised and stainless steel 

'X' in the bend gives better reinforcement for increased performance

Can be used as replacement for H restraint straps 

Choose from a total length of: 600, 800 and 1000mm

Sold Each

Galvanised Perforated Thin Coat Bead

Box of 10

This product has a 2-4 day lead time

See our full range of plaster beading

Light Duty Restraint Straps: vertical restraint for wall plates. Multi-holed, 6mm holes, 25mm offset.

Available on a 4-5 day lead time 

Provides essential protection against external moisture, preventing damp ingress in brick, block, stone, or concrete walls. Suitable for both vertical and horizontal applications

Size: 48mm x 45m. Water Resistant Duct Tape. Available in Black or Silver. 

Angle beads sold in boxes of 50 lengths. 45mm wing.

This product has a current lead time of 3-5 days 

Box of 50 Lengths

Used where a neat drip or bell-end™ lower edge is needed on external render. Available in 2.4 metre and 3.0 metre length

This product has a current lead time of 3-5 days