Wall Ties

Sold in boxes of 100

Low thermal conductivity and high structural performance

Current lead time is 5-7 days 

Light duty

This product is available on a 4-5 day lead time 

Sold in boxes of 250

Generally used in small commercial buildings and domestic dwellings

Sold in boxes of 50 

The stainless steel VIRH head will resist lateral movement in wall heads, restraining them to structural soffits whilst allowing vertical movement

The VIRH (holed) is different to the VIR as it has a hole for Tek Screws or bolts, or head channels

215mm

Heavy duty.

Soffit fixed on both sides where fixings can be made directly above

This product is available on a 4-5 day lead time 

Stainless steel cavity wall ties manufactured by Bluebird Fixings.

Sold in boxes of 100.

The sizes options to choose from are the cavity sizes.

Sold in boxes of 100

Neutras Wall Tie - Type 2 General Purpose Tie. 

Sold in boxes of 250

current lead time is 2-3 days

Low thermal conductivity and high structural performance. 

Sold in boxes of 250

Masonry to Masonry wall tie. Generally used in small commercial buildings and domestic dwellings. 

Type 2 Wall Tie

• Sold in boxes of 100 or 200
• Welded wire frame cramp for all applications
• Added flexibility provided by a wire projection.
• Various sizes are available. Type 2 Wall Tie
• See full description below for Box Qty and more info 

Sold in boxes of 250

This product's current lead time is 5-7 days

Masonry to masonry. Drip feature to prevent moisture from travelling.

Type 1 Wall Tie

Sold in boxes of 250 

Safety Plain End Tie for use over a movement joint in a run of brickwork

Sleeves supplied separately here 

Sold in boxes of 100

Used for fixing timber door and window frames to brickwork by building into mortar courses as construction progresses.

Masonry to Masonry Wall Ties. For use in larger wall cavities.

The sizes to choose from below refer to the total length of the tie. 

Sold per tie (each) 

Type 2 Wall Tie

Sold in boxes of 250 

Type 6 - Timber frame wall ties 

Made from grade 304 stainless steel

Supplied complete with Stainless Steel Annular Ring Nails (50mm x 3.35mm) 

• Wall Starter Kit for joining new walls to existing masonry
• Comes complete with Plugs, Screws, Washers and Wall Connector ties 

• Sold in boxes of 200 or 250
• Frame cramp wall ties with 3 x 6.5mm holes in the projection for dowel bars
• Used to restrain stone cladding and coping stones
• See full description below for Box Qty and more info 
• Dowels supplied separately, found here 

• Sold in boxes of 200 or 250 
• Designed to restrain masonry to steelwork
• Allows lateral movement 
• Sleeves are supplied separately here

Sold in boxes of 250

Masonry to Masonry

Type 1 Wall Tie

Sold in boxes of 250

The VE4 Light Duty Housing Tie

Wall Ties used to secure two leaves of a cavity wall together

Type 4 Wall Tie

• Sold in boxes of 200 or 250
• Designed to fix masonry to new or pre-existing structures
• Prevents sideways movement of a wall and another element (frames etc)
• See full description below for Box Qty and more info 

150 - 250mm = Boxes of 250

275 - 300mm = Boxes of 200

Current lead time of 3-5 days 

Used to restrain brickwork by fixing to the side of a stanchion.

Type 2 Wall Tie

• Sold in boxes of 200 or 250
• Supplied with a slot in the upstand to allow for various fixings
• Designed to fix masonry to new or pre-existing structures.Type 2 Wall Tie 
• See full description below for Box Qty and more info 

• Sold in boxes of 200 or 250
• Frame Cramp Wall Tie supplied with a drip to prevent moisture from crossing the cavity
• Used to connect new masonry to an existing structure. Type 2 wall tie
• See chart in full description for box QTY