Search results for: 'end frame'

• Sold in boxes of 200 or 250 
• Designed to restrain masonry to steelwork
• Allows lateral movement 
• Sleeves are supplied separately here

Rooftec dry verge angled end cap. Available in four classic colours (black, brown, grey, and terracotta)

This product is available on a 2-3 day lead time 

Sold in boxes of 250 

Safety Plain End Tie for use over a movement joint in a run of brickwork

Sleeves supplied separately here 

Seriously Good. For small, hard to reach areas.

For use with Harris 9″ roller sleeves to cover larger areas

Fix Window/door frames and timber etc into brick or blockwork, with these durable, nylon-sleeved frame fixings. 

For use with Harris Roller Sleeve 7"

• Sold in boxes of 200 or 250
• Designed to fix masonry to new or pre-existing structures
• Prevents sideways movement of a wall and another element (frames etc)
• See full description below for Box Qty and more info 

• Sold in boxes of 100 or 200
• Welded wire frame cramp for all applications
• Added flexibility provided by a wire projection.
• Various sizes are available. Type 2 Wall Tie
• See full description below for Box Qty and more info 

• Sold in boxes of 200 or 250
• Supplied with a slot in the upstand to allow for various fixings
• Designed to fix masonry to new or pre-existing structures.Type 2 Wall Tie 
• See full description below for Box Qty and more info 

• Sold in boxes of 200 or 250
• Frame Cramp Wall Tie supplied with a drip to prevent moisture from crossing the cavity
• Used to connect new masonry to an existing structure. Type 2 wall tie
• See chart in full description for box QTY

• Sold in boxes of 200 or 250
• Frame cramp wall ties with 3 x 6.5mm holes in the projection for dowel bars
• Used to restrain stone cladding and coping stones
• See full description below for Box Qty and more info 
• Dowels supplied separately, found here 

Seriously Good. 9 inches in length. Built-in extension for extra reach.

SDS Tool for driving 5mm helical timber frame ties into timber constructions

SDS drill should be set to the Hammer setting when using this fixing

Sold Each

For collection only (from PR5 8AS)

2.7 metre lengths

Designed to tie brickwork to steel studding

Used in conjunction with SFC Channel Ties

• Sold in boxes of 200 or 250, see table in main description
• Supplied with a drip to prevent moisture from crossing the cavity
• Used to connect new masonry to an existing structure
• Type 2 wall tie

Sold in boxes of 250

Designed to be used specifically with (SFC) Steel Frame Channels

Made from stainless steel, grade 304 

Helical type 6 cavity wall ties for timber frame buildings up to 4 metres in height

Used for attaching timber frame components to brick or masonry (new builds)

Can be installed using the SDS Driver

Grade 304 Stainless Steel

5mm diameter 

*Please note size 295mm is not tested*

• Sold in boxes of 10
• Designed to fix masonry to new or pre-existing structures
• Prevents sideways movement of a wall and another element (frames etc)
• See full description for more info

• Sold in boxes of 100
• For use where the building height is 18 metres (5 - 7 stories)
• The current lead time is 5-7 days
• Type 7 Wall Tie

Sold in boxes of 250 

Type 6 - Timber frame wall ties 

Made from grade 304 stainless steel

Supplied complete with Stainless Steel Annular Ring Nails (50mm x 3.35mm) 

Specifically designed and engineered to give you ultimate results when painting into corners.

• Sold in boxes of 20
• Designed to connect timber frames to masonry walls 
• Offer excellent load distribution and reinforcement 
• See full description for more info

• Sold in boxes of 10
• Supplied with a slot in the upstand to allow for various fixings
• Designed to fix masonry to new or pre-existing structures.Type 2 Wall Tie 
• See full description for more info