Builders Metalwork

Setting tool used with 8mm Helical Remedial Wall ties

Light-duty restraint straps are designed for vertical restraint applications, such as holding down wall plates to masonry.

Galvanised Steel

Other sizes/alterations are available on request

The sizes below are overall length (girth) with bend at 100mm

Hot dipped Galvanised wire mesh. Known as chicken mesh or chicken wire mesh 

Wire diameter = 0.7mm, Roll size = 900cm (w) x 50m (L),  Hole Size = 25mm x 25mm 

Heavy Duty Restraint Straps for horizontal applications. Securely tie timber roofs and floors to masonry walls. Multi-holed design with 6mm holes, 25mm offset.

Available with a 4-5 day lead time 

Light Duty Restraint Straps: vertical restraint for wall plates. Multi-holed, 6mm holes, 25mm offset.

Available on a 4-5 day lead time 

Galvanised steel

Sold each

Sold Each

Various sizes available

For light, medium and heavy applications

Sold Each

Various sizes available 

Designed for general fixings of timber components

Maximum drop of 75mm 

• Sold in boxes of 10
• Frame Cramp Wall Tie supplied with a drip to prevent moisture from crossing the cavity
• Used to connect new masonry to an existing structure. Type 2 wall tie

'X' in the bend gives better reinforcement for increased performance

Can be used as replacement for H restraint straps 

Choose from a total length of: 600, 800 and 1000mm

Sold Each

Grade 304 Stainless Steel

Wall thickness: 1mm 

Prevents fixings from damaging insulation in walls

Produced in-house - please get in touch if you require other sizes

WHO-60 is a high performance masonry repair grout.

Often used with crack stitching bars for retrofit masonry reinforcement.

The items in the image are packed inside the tub, then they are mixed to yeild 3L of smooth grout.

• Galvanised bed joint reinforcement ladder for strengthening internal brick and block masonry.
• Supplied in 2.7 metre lengths and packs of 40,
• Ladder reinforcement is designed to reduce cracking and provide structural support within mortar bed joints.
• Suitable for internal walls and low-risk exposure environments.

Perfect for horizontal restraint applications such as tying timber roofs and floors into masonry walls. These straps are galvanized and edge-coated for maximum durability and longevity.

150 (2&3mm thick) - 250mm = Boxes of 250 

275 - 300mm = Boxes of 200

Made of high-quality stainless steel, which makes it extremely durable when used to connect two masonry walls together in a building.

Type 1 Wall Tie 

Masonry to Masonry Wall Ties. For use in larger wall cavities.

The sizes to choose from below refer to the total length of the tie. 

Sold per tie (each) 

Type 2 Wall Tie

Heavy duty.

Soffit fixed both sides where fixings can be made directly above

This product is available on a 4-5 day lead time 

Manufactured from 0.9mm thick galvanised steel as standard

Sold in Boxes of 100, 200 & 250 units. Please check our size chart in the product description section

Heavy duty.

Soffit fixed on both sides where fixings can be made directly above

This product is available on a 4-5 day lead time 

Sold each.

Light duty.

The twisted head allows for fixing a right angle to cavity

This product is available on a 4-5 day lead time 

Sold in boxes of 10

Galvanised or Stainless Steel

Used to form new walls to existing buildings

• Sold in boxes of 10 and 250 
• Type 2 & 3 wall ties
• Stainless Steel Grade 304
• *Sizes over 300mm are not tested

• High-performance stainless steel wall starter system
• Connect new masonry walls to existing brick or blockwork
• BBA Approved
• All fixings included